Kubota Z411-AU Operator's Manual page 45

OPERATING THE MACHINE
IMPORTANT :
• Do not push the machine without pulling the
bypass rods, or transmission damage may
occur.
• Never pull the rods with the engine running.
1. Face the machine from the rear. lift and pull the left
side HST bypass rod from the "OPERATING
POSITION" and push it down to the "BYPASS
POSITION".
(1) Left side HST bypass rod
2. Pull the right side HST bypass rod from the
"OPERATING POSITION"
POSITION". Continue to hold the right side HST
bypass rod in the "BYPASS POSITION" in order to
move the machine.
(1) Left side HST bypass rod
(2) Right side HST bypass rod
(A) Operating position
3. After moving, place both the right side and left side
HST bypass rod back into the "OPERATING
POSITION".
40
(2) Right side HST bypass rod
to the "BYPASS
(B) Bypass position
(H) "HOLD"
TRANSPORTING THE MACHINE
Z411-AU, Z421-AU