MOWER MOUNTING
5. Put a Φ9.5 mm (0.37 in.) x 100 mm (4 in.) shaft in
the hole of the front right side lift link.
(1) Shaft (Φ9.5 mm x 100 mm,
0.37 in. x 4 in.)
(2) Clevis pin
6. Remove the 4 clevis pins mounting the mower
deck.
7. Push the mower lift pedal toward the seat and
remove the Φ9.5 mm (0.37 in.) shaft from the hole
in the rear right side lift link.
8. Slowly push the mower lift pedal to the full up
position.
9. Slide the mower deck from under the machine to
the right side of it.
26
(3) Lift link
Z411-AU, Z421-AU