Ryobi TSS103 Operator's Manual page 34

CLEANING THE LED LENS
See Figure 45.
Over time the LED light may become cloudy or dull. If this
occurs, the LED lens may require cleaning.
To clean the lens:
 Unplug the saw.
 Raise the saw arm.
MAINTENANCE
LED
LENS
COTTON
SWAB
 Remove the blade as described in the Assembly section.
 Rotate the lower blade guard to expose the LED lens.
 Using a small cloth or a cotton swab, gently clean away
any dirt or debris from the LED lens.
NOTE: Use caution when cleaning to avoid damaging
the lens.
 Reinstall the blade.
34 − English
Fig. 45