Network Setup Menu - NAD T557 Owner's Manual

OPERATION
USING THE T 557

NETWORK SETUP MENU

The NETWORK settings are needed to use the BD Live feature. By
connecting the T 557 to the internet, special BD-ROM sites can be enabled
by some BD-ROM discs. Online contents can be downloaded and watched
if a BD-ROM site contains links to future movie trailers, bonus contents and
other related features.
Ensure proper broadband connectivity when configuring the following
NETWORK features.
CONNECTION SETTING
Press [ ] or [ENTER] to setup your network connection. Use the following
procedure in setting up your connection.
1 Upon selecting > or [ENTER], the CONNECTION SETTING as below is
shown. Use [ ] to configure your connection with below
OSD.
Static: Select to set manually the IP address, Subnet Mask, Gateway and
consequently the DNS Server settings.
Dynamic: Select to automatically allocate an IP address.
2 After selecting either "Static" or "Dynamic", click "OK" to complete the
network connection.
16
3 After setting up the connection, a menu will prompt you test your
network connection. Click "OK" to complete the network connection
and exit the "CONNECTION SETTING" menu.
4 If "Test" is selected, the network connection status is displayed as in
below
5 Select "OK" to exit connection setting/status OSD.