Setup; Using The T 55; Region Management Information; About Dvd/Svcd/Vcd/Cd - NAD T535 Owner's Manual

You may operate the T 535 DVD/SACD Player from its front panel or via the
DVD 9 remote control. Since the remote will be the primary controller for
most cases, we will focus on remote-controlled operations. Be sure also to
read the section, "Front Panel".

REGION MANAGEMENT INFORMATION

The T 535 is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region
number described on the DVD disc does not correspond to the Region
number shown on the back of the T 535, the cannot play that disc. The
VFD and OSD will display 'Region Error' when an incompatible region disc
is loaded.

ABOUT DVD/SVCD/VCD/CD

The T 535 has exceptional playability. It has support for DVD-Video, DVD-
R/-RW/+R/+RW, DVD-A, SACD, DivX, SVCD with or without PBC (Play Back
Control),VCD, Audio CD, CD-R/-RW and including recorded MP3, copyright-
protected WMA and JPEG files.
NOTE
You cannot playback discs other than those listed above such as Video,
CD-CD-ROM, CD-Extra, CD-G, photo-CD, and CD-i data discs. To do so
may render the T 535 permanently inoperable.
diSc loading and plaYback
You can open the disc tray by pressing [STOP/OPEN] button even if the
T 535 is in standby mode. The power indicator will turn from amber to blue.
Place a disc on the disc tray with the playback side down.
There are two different disc sizes. Place the disc in the correct guide on the
disc tray. If the disc is out of the guide, it may damage the disc and cause
the T 535 to malfunction. "UNKNOWN DISC" appears on both the T 535's
display and the TV/monitor screen, if the disc is placed upside down (and it
is a single sided disc).
The following are important tips when loading a disc
•
Do not push the disc tray while it is moving. Doing so may cause the
T 535 to malfunction
• Do not push up the disc tray or put any objects other than discs on the
disc tray. Doing so may cause the T 535 to malfunction.
• Keep your fingers well clear of the disc tray as it is closing. Be especially
careful with children's fingers around the closing disc tray, as there is a
risk of personal injury.
Press [PLAY/PAUSE], the disc tray is automatically closed and playback
begins. Press the DVD 9's numeric button(s) to select the desired track
(CD) and then ENTER. Play of the selected item now begins (Depending
on the DVD disc or other disc media, some operations may be different or
restricted. Refer to the jacket or case of the disc you are playing).
Press the DVD 9's [STOP] key twice during playback to display an audio CD's
total number of tracks and total playback time in the VFD.
If you insert a SVCD videodisc, the PBC symbol (Play Back Control) will
appear in the T 535's display. The [MENU] button on the DVD 9 will toggle
on and off PBC.
After playing back all of the chapters in the title, T 535 automatically stops
and returns to the menu screen.
NOTE
Do not move the T 535 during playback. Doing so may damage the disc
and the T 535.
T535_eng_OM_v07.indd 11

ABOUT THE ON-SCREEN DISPLAY (OSD)

The T 535 employs a self-explanatory on-screen display "menu" that will
appear on the connected video monitor/TV. These are required during
the setup process (and are useful in day-to-day operation), so be sure to
connect the monitor/TV before proceeding with setup.
diSplaY the t 535 Setup menu
Press the DVD 9's [SETUP] button for the Setup Menu OSD to appear. With
the use of the DVD 9's navigation buttons, you may select various menus. If
the Setup Menu does not appear, check your applicable video connections.
navigating the Setup menu oSd and making changeS
To navigate through the Setup Menu OSD options, please do the following
using the DVD 9 remote control:
1 Press
keys to move up or down the menu selections.
2 Press [ENTER] to select a menu.
3 Use
keys to select through the options of a particular menu.
4 Press keys to save the settings and at the same time move to the
next option.
To exit from a menu option, press repeatedly the DVD 9's [RTN] key as
applicable or the [SETUP] key to exit completely.
NOTE
During SACD playback, the keys cannot cannot be used directly to select
through the track list. Press [STOP] first and then use the
through the track list.
diSplaY diSc oSd
You can display the general disc playback status on the TV screen. Some
items can be changed using the menu. To use the on-screen display:
1 Press the DVD 9's [DISP] during playback.
2 Press
to select an item. The selected item is highlighted.
3 Key-in the desired the number button or press [ENTER] as applicable.
NOTES
• The display feature may not be available for all disc media and is media
dependent.
• During playback and while at "Timer" OSD option, repeatedly press
[ENTER] key to display the disc's track elapsed, track remain and total
elapsed time. This is applicable only for CD playback.
• If no button is pressed for about 10 seconds, the on-screen display
disappears.

SETUP

uSing the t 535
keys to scroll
11
16/7/07 08:12:22