En Original Instructions - Metabo NFR 18 LTX 90 BL Original Instructions Manual

en ENGLISH
Original instructions
1. Declaration of Conformity
We declare and accept sole responsibility for
ensuring: these cordless nailers, identified by their
type and serial number *1), conform to all relevant
provisions of the directives *2) and standards *3),
Technical Documents for * 4)- see page 4.
For UK only:
We as manufacturer and authorized person to
compile the technical file, see *4) on page 4,
hereby declare under sole responsibility that these
cordless nailers, identified by type and serial
number *1) on page 4, fulfill all relevant provisions of
following UK Regulations S.I. 2016/1091,S.I. 2008/
1597, S.I. 2012/3032 and Designated Standards
EN 62841-1:2015, prEN 62841-2-16:2022, EN IEC
63000:2018
2. Specified Conditions of Use
This cordless nailer is intended for driving in nails
into wood (or similar soft materials).
The cordless nailer is used in different areas: floor
and wall frames, half-timbered superstructures,
window superstructures, substructure for floor
covering and roof covering, wall panelling and
modular house construction.
The tool is not intended for driving in staples into
hard surfaces such as steel and concrete.
The machine is not suitable for fixing electrical lines.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3. General Safety Information
For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Read the operating
instructions to reduce the risk of injury.
WARNING – Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Always include these documents when passing on
your power tool.
14
4. Special safety instructions
4.1 Fastener driving tool safety warnings
a) Always assume that the tool contains
fasteners. Careless handling of the tool may result
in unexpected firing of fasteners and personal
injury.
b) Disconnect the tool from the power source
when loading and unloading fasteners, making
adjustments or changing accessories. The tool
may be accidentally activated if it is connected to
the power source, which may result in personal
injury.
c) Be careful when handling fasteners,
especially when loading and unloading. The
fasteners have sharp points which may result in
personal injury.
d) Do not point the tool towards yourself or
anyone nearby. Unexpected triggering will
discharge a fastener, which may result in personal
injury.
e) Keep fingers away from the trigger when not
operating the tool and when moving from one
operating position to another. Unexpected
triggering will discharge a fastener, which may
result in personal injury.
f) Hold the tool by insulated gripping surfaces,
when performing an operation where the
fastener may contact hidden wiring. A fastener
contacting a "live" wire may make exposed metal
parts of the tool "live" and could give the operator an
electric shock.
g) Hold the tool with a firm grasp during
operation. Uncontrolled recoil of the tool may result
in unintended activation, which may result in
personal injury.
h) Keep all body parts such as hands and legs,
etc. away from the firing direction of the tool.
The fastener may penetrate the workpiece as well
as any object behind it, which may result in personal
injury.
i) When using the tool, keep all body parts such
as hands and legs, etc. away from the area
where the fastener is driven into the workpiece.
The fastener could deflect and exit the workpiece,
which may result in personal injury.
j) Do not actuate the tool unless the tool is
placed firmly against the workpiece. If the tool is
not in contact with the workpiece, the fastener may
be deflected away from the workpiece, which may
result in personal injury.
k) Do not use this tool for fastening electrical
cables. It is not designed for electric cable
installation and may damage the insulation of
electric cables, thereby causing electric shock or
fire hazards.
l) Disconnect the tool from the power source if
a fastener jams in the tool. While removing a
jammed fastener, the tool may be accidentally