Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Hyundai Manuals
  4. Drill
  5. HPACK20V2A4
  6. Original instructions manual

Hyundai HPACK20V2A4 Original Instructions Manual

20v cordless angle grinder, 20v cordless impact drill
Hide thumbs

Advertisement

Quick Links

Download this manual
20V CORDLESS ANGLE GRINDER
20V CORDLESS IMPACT DRILL
HPACK20V2A4
ORIGINAL INSTRUCTIONS
WARNING: READ THE FOLLOWING INSTRUCTIONS BEFORE USING THIS MACHINE.

Advertisement

loading

Related Manuals for Hyundai HPACK20V2A4

Summary of Contents for Hyundai HPACK20V2A4

  • Page 1 20V CORDLESS ANGLE GRINDER 20V CORDLESS IMPACT DRILL HPACK20V2A4 ORIGINAL INSTRUCTIONS WARNING: READ THE FOLLOWING INSTRUCTIONS BEFORE USING THIS MACHINE.

  • Page 2: Table Of Contents

    CONTENTS 1. PACKAGE CONTENT LIST 2. CORDLESS ANGLE GRINDER 3. CORDLESS IMPACT DRILL WARRANTY 5. PRODUCT FAILURE 6. WARRANTY EXCLUSIONS...

  • Page 3: Package Content List

    1. PACKAGE CONTENT LIST  Remove all packaging materials.  Remove remaining packaging and packing inserts (if included).  Check that the package contents are complete.  Check the appliance, the power cord, the power plug of charger and all accessories for transportation damage or not.
  • Page 4 c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
  • Page 5 d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
  • Page 6 c) Do not use accessories which are not specifically designed and recommended by the tool manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe operation. d) The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool.
  • Page 7 The wheel may either jump toward or away from the operator, depending on direction of the wheel’s movement at the point of pinching. Abrasive wheels may also break under these conditions. Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below.
  • Page 8 Investigate and take corrective action to eliminate the cause of wheel binding. d) Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully re-enter the cut. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. e) Support panels or any oversized workpiece to minimize the risk of wheel pinching and kickback.
  • Page 9  When disposing of batteries, follow the instructions given in the section “Protecting the environment”.  Do not cause short circuits. If connection is made between the positive (+) and negative (-) terminal directly or via accidental contact with metallic objects, the battery is short circuited and an intense current will flow causing heat generation which may lead to casing rupture or fire.
  • Page 10 way and understand the hazards involved.  Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • Page 11 20V d.c. Rated voltage (direct current) Rotation speed 4000-8500/min Max. disc diameter: Ø 125mm Drive spindle thread: M 14 HPACK20V2A4 Battery type 20 V d.c. 2Ah /4Ah Lithium-ion HPACK20V2A4 Charger type Input 220-240V~ 50-60Hz, 65W Output 21V d.c., 2.5A Charging time...
  • Page 12 Warning  that the vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used; and  of the need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
  • Page 13 Remove the battery: press the battery release latch in and at the same time pull the battery pack off. To insert the battery, push the battery pack onto the contacts of the tool. 2.5.3 FITTING THE AUXILIARY HANDLE (FIG. 1) The auxiliary handle (6) can be attached to the angle grinder in 3 different positions: left and right and top of head.
  • Page 15 2.5.7 OPERATON MODES  GRINDING Hold the handle (3) and auxiliary handle (6) firmly and switch on. Avoid blocking the ventilation slots with your hand, as this may cause the grinder to overheat. Let the disc reach full speed. Apply the grinder to the item.
  • Page 16 2.7 SERVICE DEPARTMENT  Damaged switches must be replaced by our after-sales service department.  If the connecting cable (or mains plug) is damaged, it must be replaced by a special connecting cable which is available from our service department. Replacement of the connecting cable should only be carried out by our service department (see last page) or by a qualified specialist (qualified electrician).
  • Page 17 2.10 DELARATION OF CONFORMITY BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France, declares that, Product: Angle Grinder 20V Trade mark: HYUNDAI Model: HPACK20V2A4 Serial number: 20210603656-20210603955 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards.

  • Page 18: Cordless Impact Drill

    3. CORDLESS IMPACT DRILL 3.1 INTENDED USE The power tool is intended for driving and drilling through wood, metal, plastics and masonry. Not suitable for professional use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions.
  • Page 19 c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on.
  • Page 20 f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 ° C may cause explosion. NOTE The temperature „130 °C“ can be replaced by the temperature „265 °F“. g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.
  • Page 21 circuiting leading to heat generation causing rupture or file. Moreover do not dispose of the batteries in fire, explosion and/or intense burning may result. Under extreme conditions, battery leakage may occur. When you notice liquid on the battery,  proceed as follows: Carefully wipe the liquid off using a cloth.
  • Page 22 Children shall not play with the appliance. Cleaning  and user maintenance shall not be made by children without supervision. If the supply cord is damaged, it must be replaced by  the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. CAUTION: Do not recharge non-rechargeable batteries.
  • Page 23 3.4 YOUR PRODUCT Keyless chuck Torque adjustment ring Two speed selector On/off switch trigger Battery pack Forward/reverse knob LED work light Battery pack release button Battery capacity indicator 10) Button for battery capacity indicator 11) Belt clip 12) Charger 13) Battery capacity indicator. 14) Slot of charger...
  • Page 24 Chuck 13 mm keyless Gear Train 2 Speed No Load Speed 0-400/0-1600 min Clutch 19+2 Positions HPACK20V2A4 Charger type 20V d.c. 2Ah /4Ah Lithium-ion HPACK20V2A4 Battery type Input 220-240V~ 50-60Hz, 65W Output 21V d.c., 2.5A 50min for 2Ah battery Charging time...
  • Page 25 3.6 FEATURES 3.6.1 LI-ION BATTERY (5) Advantages of Li-ion batteries:  Li-ion batteries have a higher capacity/weight ratio (more power for less heavy, more compact, battery)  No memory effect (capacity loss after several charge/discharge cycles) like other type batteries. ...
  • Page 26 13) The indicator light (13) become to green and flash when charging. 14) When fully charged The indicator light (13) become to green light. 15) Frequently monitor the charger and battery pack while connected. 16) Unplug the charger and disconnect it from the battery pack when finished. 17) Allow the battery pack to cool completely before using it.
  • Page 27 This helps to reduce the possibility of accidental starting when not in use. To lock the switch trigger, place the direction of rotation selector in the center position. 3.7.7 DIRECTION OF ROTATION Direction of rotation is controlled by the direction of rotation selector located above the switch trigger. 3.7.8 CLOCKWISE ROTATION Right: To select forward rotation, release the on/off switch and push the forward/reverse lever to the left side of the tool.
  • Page 28 WARNING: Do not stare directly at the light beam. Never aim the beam at any person or an object other than the work piece. Do not deliberately aim the beam at personnel and ensure that it is not directed towards the eye of a person for longer than 0.25s.
  • Page 29 - Only use this setting to bore or drill into stone/concrete. The Hammer setting works well when drilling/chipping into materials. The tip of tool MUST be firmly depressed for the hammer action to engage. NOTE: Only use a masonry bit when drilling into masonry materials. 3.8 CLEANING AND MAINTENANCE 3.8.1 CLEANING Keep the ventilation slots of the machine clean to prevent overheating of the engine.
  • Page 30 3.10 DECLARATION OF CONFORMITY BUILDER SAS 32, rue Aristide Bergè s - ZI 31270 Cugnaux - France, declares that， Product:Cordless MPACT Drill 20V Trade mark: HYUNDAI Model: HPACK20V2A4 Serial number: 20210603656-20210603955 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards.

  • Page 31: Warranty

    4. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor.

  • Page 32: Product Failure

    5. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine.

  • Page 33: Warranty Exclusions

    6. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...