En Original Instructions - Metabo HK 18 LTX 20 Original Instructions Manual

en ENGLISH
Original instructions
1. Declaration of Conformity
We, being solely responsible, hereby declare that
this cordless hot glue gun, identified by type and
serial number *1), meets all relevant requirements
of directives *2) and standards *3). Technical
documents for *4) - see Page 3.
We, being solely responsible, hereby declare that
these...:
For UK only:
We as manufacturer and authorized person to
compile the technical file, see *4) on page 3,
hereby declare under sole responsibility that these
random orbital sanders, identified by type and serial
number *1) on page 3, fulfill all relevant provisions of
following UK Regulations S.I. 2016/1091, S.I. 2016/
1101, S.I. 2012/3032 and Designated Standards
EN 60335-1:2012+A11:2014+A13:2017+A1/A14/
A2:2019+A15:2021,EN 60335-2-
45:2002+A1:2008+A2:2012, EN IEC 63000:2018.
2. Specified Conditions of Use
This cordless hot glue gun is intended for solvent-
free adhesives only.
Area of application: All-purpose adhesive for
repairing and fixing.
Suitable for:
200°C/400°F: paper, cardboard, wood, plastic
(except PP, PE, PTFE, styrofoam and soft PVC),
glass, ceramics, stone, textiles, cork, leather, metal,
etc.
130°C/270°F: temperature-sensitive materials such
as PU foam, polystyrene, nylon, polyester, rubber,
ABS and rigid PVC.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3. General Safety Information
For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Read the operating
instructions to reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Pass on your power tool only together
with these documents.
8
4. Special Safety Instructions
The hot-melt glue can reach a temperature
of up to 200°C/ 400°F! Caution, risk of
burns!
- Do not use liquid or pasty adhesives!
- After skin contact with hot adhesive: Cool
immediately with cold water. Do not attempt to
remove the glue from the skin. If necessary, seek
medical assistance.
- After eye contact with hot adhesive: Immediately
cool under running water for approx. 15 min. and
seek medical attention immediately.
- Do not use in conjunction with easily combustible
/ flammable substances.
- Do not operate on easily flammable surfaces or
flammable environments (such as paper, textiles,
etc.).
- Check suitability of heat-sensitive materials.
- Do not pull glue stick out of the gun. Hot glue
running into the glue gun may cause damage.
Danger from water or moisture!
- Do not expose the device to rain.
- Do not use the device when damp, or in a damp or
wet environment.
- Only use the device in dry rooms.
Use only original spare parts
Use only original Metabo sticks
Repairs may only be carried out by qualified
companies
Do not leave the device unattended.
Do not pull the inserted glue stick out of the
back of the heating channel in order not to
damage the device.
Replace the nozzle set (4) only when the device is
at operating temperature. Caution risk of burns! Use
protective gloves or similar. Remove the battery
pack before each replacement!
This device is not designed for use by persons
(including children) with physical, sensory or mental
disabilities, or with insufficient experience and/or
knowledge, unless they are supervised by a person
responsible for their safety, or have received
instructions on how to use the device by this person.
Children may not play with the device. Cleaning and
user maintenance may not be performed by
children unless supervised.
Never allow children to use the device.
Danger from electrical current
Contact of water with live parts can cause
electric shock, burns or death. Clean the unit only
when dry.