HP HPE StoreEasy 1000 Getting Started Manual page 11

Procedure
1. Install the rail kits.
For detailed instructions on installing the HPE rack rails into square and round hole racks for HPE 2U Storage system,
see the documentation shipped with the rail kit, for example HPE Rack Rail Kit installation instructions.
2. Slide the HPE StoreEasy 1000 Storage into the position on the rails.
Figure 1: HPE StoreEasy 1000 Storage insertion into the rack
3. To secure the HPE StoreEasy 1000 Storage to the rails, the Configure-to-Order (CTO) bracket at the rear ends of the
rails must overlap the chassis tab.
2
Figure 2: CTO bracket location
4. Secure the HPE StoreEasy 1000 Storage to the rack rails using thumbscrews on the front bezel.
1
11
Setup and install