Muratec MFX-1430 Network Manual page 75

Item
A NetBIOS
Name
B Work Group
Name
C DHCP
Setting
D IP Address
E Subnet
Mask
F Gateway
Address
G DNS Server
Address
H DNS Suffix
I WINS
Address
J HTTP Port
No.
K Initialize
3
When you have finished the entering, click [Save] to save the settings.
4
Reboot the machine to activate the new settings. Turn the machine off and
after three or more seconds, turn it back on.
5-22 Using the Web Browser
Description
Enter the NetBIOS name.
• A NetBIOS name can be up to 15 alphanumeric characters
and the "–" symbol with no blank spaces.
• The NetBIOS name must be unique on the network.
Enter the name of the workgroup to which your machine
belongs.
If there is not a workgroup on your network, create a work-
group on Windows. A domain name cannot be used as a
workgroup name.
• If there is no workgroup in your network, create a new
workgroup by typing a new name that contains up to 15
characters. The name cannot include symbols and blank
spaces. The name can include alphanumeric and the follow-
ing symbols: ! @ # $ % ^ & ( ) – _ ` { } . ~
Consult with your network administrator before creating a
new workgroup.
• Cannot enter a domain name as a work group.
• The NetBIOS name must be unique on the network.
If a DHCP server is installed on your network, select "ON".
After rebooting the machine, an IP address and Subnet Mask
will be automatically assigned by the DHCP server. According
to the DHCP server setting, a primary gateway address and
primary DNS server address may be assigned.
If your network is not using DHCP, select "OFF".
IMPORTANT: Once the DHCP server has assigned the IP
address to your machine, that IP address MUST be reserved
within the specific DHCP scope. Failure to do so could result
in failed operation when the IP address lease expires.
Enter the IP address of your machine.
Enter the IP address for the subnet mask.
Enter the IP address of the gateway.
Enter the IP address of the DNS server.
Enter the DNS suffix.
Enter the IP address of the WINS server.
This sets the HTTP port number for connecting the optional
"OfficeBridge Expansion Kit" from your web browser.
Normally, set to "80".
Initialize the TCP/IP settings. The settings will return to the
factory default setting.