After Use; Inspection And Repairs - Black & Decker BESTE625 Original Instructions Manual

Vibration
The declared vibration emission
values stated in the technical data
and the declaration of conformity
have been measured in accordance
with a standard test method
provided by EN50636 and may be
used for comparing one tool with
another.
The declared vibration emission
value may also be used in
a preliminary assessment of
exposure.
Warning! The vibration emission
value during actual use of the
power tool can differ from the
declared value depending on the
ways in which the tool is used. The
vibration level may increase above
the level stated.
When assessing vibration exposure
to determine safety measures
required by 2002/44/EC to protect
persons regularly using power tools
in employment, an estimation of
vibration exposure should consider,
the actual conditions of use and
the way the tool is used, including
taking account of all parts of the
operating cycle such as the times
when the tool is switched off and
when it is running idle in addition to
the trigger time.

After use

♦ When not in use, the machine
should be stored in a dry, well
ventilated place out of reach of
children.
♦ Children should not have access
to stored machines.
♦ When the machine is stored
or transported in a vehicle it
should be placed in the boot or
restrained to prevent movement
following sudden changes in
speed or direction.

Inspection and repairs

♦ Before use, check the machine
for damaged or defective parts.
♦ Check for breakage of parts and
any other conditions that may
affect its operation.
♦ Do not use the machine if any
part is damaged or defective.
♦ Have any damaged or defective
parts repaired or replaced by an
authorised repair agent.
♦ Never attempt to remove or
replace any parts other than
those specified in this manual.
ENGLISH
9