Electrical Safety; Using An Extension Cable - Black & Decker BESTE625 Original Instructions Manual

♦ Never touch the cutting line while
the machine is running.
♦ Do not put the machine down
until the cutting line has come to
a complete standstill.
♦ Use only the appropriate type
of cutting line. Never use metal
cutting line or fishing line.
♦ Be careful not to touch the line
trimming blade.
♦ Take care to keep the mains
cable away from the cutting line.
♦ Always be aware of the position
of the cable.
♦ Keep hands and feet away
from the cutting line at all times,
especially when switching on the
motor.
♦ Never operate the machine with
damaged guards or without
guards in place.
♦ Take care against injury from
any device fitted for trimming the
filament line length.
♦ After extending new cutter line
always return the machine to its
normal operating position before
switching on.
♦ Do not use the lawn trimmer
(edge trimmer), if the cords are
damaged or worn.
♦ Keep extension cords away from
cutting elements.

Electrical safety

This machine is double
insulated; therefore no
earth wire is required.
Always check that
the power supply
corresponds to the
voltage on the rating
plate.
♦ If the supply cord is damaged,
it must be replaced by the
manufacturer or an authorised
BLACK+DECKER Service
Centre in order to avoid a hazard.
♦ Electric safety can be
further improved by using
a highsensitivity 30 mA Residual
Current Device (RCD).

Using an extension cable

Always use an approved extension
cable suitable for the power input of
this tool (see technical data).
ENGLISH
11