Installing Hard Drives; Removing Hard Drive Trays - Bosch DIVAR IP 6000 2U Installation Manual

14 en | Chassis setup and maintenance
3.2

Installing hard drives

This chapter describes the removing and installing of hard drives.
3.2.1

Removing hard drive trays

The drives are mounted in drive carriers to simplify their installation and removal from the
chassis. These carriers also help promote proper airflow for the drive bays.
1
2
To remove hard drive trays from the chassis:
1.
2.
Notice!
Except for short periods of time (swapping hard drives), do not operate the unit with the
hard drives removed from the bays.
2014.01 | V2 | DOC
Drive carrier
Dummy drive
Press the release button on the drive carrier. This extends the drive carrier handle.
Use the handle to pull the drive out of the chassis.
Installation Manual
DIVAR IP 6000 2U
Bosch Sicherheitssysteme GmbH