11. Removal Procedure
Service Manual
11.1 Removal Procedure of Indoor Unit
Step
1.Remove filter
Open the pane,Push up and pull down the filter
2.Remove panel
Remove screws fixing display, and then remove
the display.
Separate the panel rotation shaft from the groove
fixing the front panel and then removes the front
panel.
3.Remove horizontal louver
Bend the horizontal louver with hand and
then separate the horizontal louver from the
crankshaft of step motor to remove it.
Installation and Maintenance
Caution: discharge the refrigerant
completely before removal.
Procedure
Left filter and right filer
Screws
Panel rotation
Horizontal louver
Panel
73