Parameters; Parameter Types; Module/Channel Parameters - Siemens SIMATIC ET 200SP HA Equipment Manual

Parameters

6.1

Parameter types

Definition
You define and thereby influence the functions supported by the module operation of the I/O
module via the parameter types.
6.2

Module/channel parameters

Definition
Module/channel parameters are specific parameters whose configuration can affect the entire
module or channels.
Note
Each re-parameterization resets the corresponding reaction.
Description
The following module/channel parameters are available:
Parameters
Diagnostics, Missing supply
voltage L+ (Page 20)
Diagnostics, Short-circuit to
ground (Page 20)
Channel activated
(Page 21)
Reaction to CPU STOP
(Page 21)
Substitute value (Page 21)
DQ 32x24VDC/0.5A HA
Equipment Manual, 08/2019, A5E48262762-AB
Value range
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Shutdown
• Keep last value
• Output substitute value
1 • 0
• 1
Default Parameter re‐
assignment in
Enabled Yes
Enabled Yes
Enabled Yes
Shutdown Yes
0 Yes
6
Efficiency range
RUN
Module
Channel
Channel
Channel
Channel
19