Double-Width Terminal Block - Siemens SIMATIC ET 200SP HA Equipment Manual

Parameters
6.3 Explanation of the module/channel parameters
The potential group also ends if there is a black terminal block next to it. Black terminal blocks
are fed individually and cannot be included in potential groups.
You can find additional information on the configuration of the potential group in the system
manual SIMATIC; Distributed I/O System; ET 200SP HA.
6.3.7

Double-width terminal block

Definition
The parameter applies to the I/O module on the terminal block with a potential distributor.
This parameter only affects the configuration in HW Config.
Description
The "Double-width terminal block" parameter can be activated in the hardware properties for the
I/O module.
22
DQ 32x24VDC/0.5A HA
Equipment Manual, 08/2019, A5E48262762-AB