Table of Contents
Advertisement
4
Press the / button to select the tab.
The selected tab is shown in blue, and
setting items of the selected tab appear.
5
Select an item.
Press the / button to select the item.
The item to be changed is displayed in blue.
6
Make the setting or adjustment on an item.
When changing the adjustment level:
To increase the number, press the button.
To decrease the number, press the button.
When selecting the setting:
Press the / button to select the setting.
If the Control Lock is set to "On," the setting
cannot be changed.
For details about Control Lock, see page 27.
To hide the menu
Press the MENU button.
The menu disappears automatically if a button is
not pressed for one minute.
To hide the operation buttons
Press the CONTROL button.
About the storage of the settings
The adjusted settings are automatically stored in
the monitor memory.
For details on settings for the next power-on,
refer to "Power On Setting" (page 28) in the
System Configuration menu.
About the control navigation
Depending on the state, the operation buttons of
the unit light as shown below:
White light: Operable state.
Green light: Operating state.
Off: Unable to operate.
Adjustment Using the Menus
Items
The screen menu of this monitor consists of the
following items.
Color Tone Adjustment (page 25)
Gamma
Phase
Chroma
Brightness
Contrast
Color Temperature
Gain R Offset
Gain G Offset
Gain B Offset
Bias R Offset
Bias G Offset
Bias B Offset
Mono
Sharpness H
Sharpness V
RGB Range
Color Space
Screen Control (page 25)
4K Scan Size
HD Scan Size
SD Scan Size
Flip Pattern
SD Aspect
HDMI Signal Format
PIP / POP (page 26)
Clipping Size
Sub Screen Position
Pattern Skip
Input/Output Configuration (page 26)
Port A Input Select
Port B Input Select
Input Name
Power Supply
HDCP Setting
Auto Input Select
System Configuration (page 27)
Control Lock
24
Advertisement
Table of Contents
