About This User's Guide; Before You Start; Installation Overview; The Setup Wizard - D-Link DSL-504T User'smanual

Hide thumbs Also See for DSL-504T:

Table of Contents

About This User's Guide

This user's guide provides instructions on how to install the DSL-504T ADSL Router and use it to

provide Internet access for an Ethernet LAN.

If you are using a computer with a functioning Ethernet port, the quickest and easiest way to set

up the DSL-504T is to follow the instructions provided in the Quick Installation Guide.

Please read and make sure you understand all the prerequisites for proper installation of your new

Router. Have all the necessary information and equipment on hand before beginning the

installation.

The procedure to install the Router can be described in general terms in the following steps:

1. Gather information and equipment needed to install the device. Before you begin the actual

installation make sure you have all the necessary information and equipment.

2. Install the hardware, connect the cables to the device and connect the power adapter.

3. Check the IP settings on your computer and change them if necessary so the computer can

access the web-based software built into the Router.

4. Use the web-based management software to configure the device to suit the requirements

of your ADSL service and private network.

Many users will be able to configure all the settings necessary to use the DSL-504T with the Setup

Wizard. For most ADSL users, the simplest way to setup the DSL-504T is to use the Setup Wizard

to configure the Internet connection. Once you access the web interface used to configure the

device, just launch the Setup Wizard to configure your Internet connection.

DSL-504T DSL Router User's Guide

Table of Contents