Table of Contents
Advertisement
MultiVOIP Quick Start Guide
The Billing/Misc tab displays the parameters for auto call,
automatic disconnection, billing options and dynamic jitter
buffer.
13. If you want to dedicate a local voice/fax channel to a
remote voice/fax channel (so you will not have to dial the
remote channel), click the Auto Call Enable option in the
Auto Call group. Then enter the phone number of the
remote MultiVOIP 200 in the Phone Number field.
14. The Automatic Disconnection group provides three
options to be used singly or in combination.
The Jitter Value defines the average inter-arrival packet
deviation (in milliseconds) before the call is automatically
disconnected. Jitter is the inter-arrival packet deviation
(phase shift of digital pulses) over the transmission
medium that causes voice breakup which can be
particularly disruptive to voice communications. The
default setting is 20 milliseconds. A higher value means
that the voice transmission will be more accepting of jitter.
A lower value will be less tolerant of jitter.
56
Advertisement
Table of Contents
