Maintenance And Lubrication - Braun Under-Vehicle Lift NUVL855C Service Manual

Proper maintenance is necessary to ensure safe,
trouble free operation. Inspecting the lift for
any wear, damage or other abnormal conditions
should be a part a regular service program. Sim-
ple inspections can detect potential problems.
The maintenance and lubrication procedures
specified in the following schedule must be
performed by a Braun authorized service repre-
sentative at the scheduled intervals according
to the number of cycles. NUVL Series lifts are
equipped with a cycle counter (digital display
built into the electronic control board).
NUVL Series lifts are equipped with hardened
pins and self-lubricating bushings to decrease
wear, provide smooth operation and extend the
service life of the lift.
When servicing the lift at the recommended
intervals, inspection and lubrication procedures
specified in the previous sections should be re-
peated. Clean components and the surrounding
area before applying lubricants.

Maintenance and Lubrication

LPS2 General Pur-
pose Penetrating
Oil is recommended
where Light Oil is
called out. Use of
improper lubricants
can attract dirt or
other contaminants
which could result
in wear or damage
to the components.
Platform compo-
nents exposed to
contaminants when
lowered to the
ground may require
extra attention.
Lift components requiring grease are lubricated
during assembly procedures. When these compo-
nents are replaced, grease must be applied during
installation procedures. Specified lubricants are
available from The Braun Corporation (part num-
bers provided).
W ARNING
Maintenance and
lubrication proce-
dures must be per-
formed as specified
by an authorized
service technician.
Failure to do so may
result in serious
bodily injury and/or
property damage.
Page 37