Dyson DC 23 Service Manual page 62

Service manual
Brushbar microswitch loom
151 Ensure the brushbar motor wires are looped under the motor brushes. Important: Hold the
brushbar microswitch loom out of the way. Lower the brushbar into the brushbar motor cover.
When correctly located the brushbar motor end mounts will sit onto the shelves. Ensure the
transmission manifold is sealed behind the brush housing.
59
Brushbar motor end mounts
Transmission manifold
Ensure the motor wires sit under the
motor brushes
152 Carefully locate the brushbar
microswitch loom behind the
rubber retainer on the rear of the
brushbar motor.