Call Alert; Sending A Call Alert - Motorola LM100 User Manual

Call Alert

CALL ALERT
Alert
A Call Alert notifies the targeted person that you want to get in
touch with them. Your unit is equipped with Radio ID storage
locations, numbered 1 through 9. Each location is assigned a
Radio ID at the time of purchase. The storage location numbers
and corresponding Radio IDs used to send a Call Alert are the
same storage location numbers that are used in Private Call. Press
to enter into the Call Alert mode. To scroll to the ID's corre-
Alert
sponding storage location number, select a radio ID by using the
keys.

Sending a Call Alert

(Example: Send a Call Alert to Radio ID 3, which is stored in location #6
(C6). The last Private Call or Call Alert was with Radio ID 1, which is
stored in location #1 (C1).)
1. Press .
Alert
2. Press five times.
3. Press PTT.
Two alert tones signal when the Call Alert successfully reaches
the targeted unit. If the targeted unit is out-of-range or turned
off, four alert tones indicate that the Call Alert failed to reach the
targeted unit. After sending a Call Alert, the display automati-
cally returns to Group Call mode.
LM100/m100
When you enter the
Alert mode, the storage
location number of the
last sent or received
Radio ID appears.
The letter "C"
appears before the
storage location num-
ber, indicating that you
are in Alert mode.
Pressing PTT sends
a Call Alert to radio
ID 3.
USER'S GUIDE
11