Advertisement
Quick Links
(NAVRGB6.0-VI+GMIRC1)
Manual Version: 1.0
NOTICE: We recommend having this installation performed by a certified technician.
All product names, logos, brands, trademarks and registered trademarks are
property of their respective owners.
Installation Manual
GMC Sierra 2007-2011
NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100
DESIGNED + MANUFACTURED IN THE
1
Advertisement
Related Manuals for NavTool NAVRGB6.0-VI+GMIRC1
Summary of Contents for NavTool NAVRGB6.0-VI+GMIRC1
- Page 1 DESIGNED + MANUFACTURED IN THE Manual Version: 1.0 NOTICE: We recommend having this installation performed by a certified technician. All product names, logos, brands, trademarks and registered trademarks are property of their respective owners. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
-
Page 2: Important Warning
• Route all wires along with factory harnesses. Do not drill or make any unnecessary holes. • Always use the help of a professional installer to prevent any damage to the vehicle or the interface. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100... -
Page 3: What's In The Box
What’s In The Box? Push Button Interface (Part # NT-PUSH-BTN) (Part # NAVRGB6.0-VI) Vehicle Specific Vehicle Specific Interface Harness Plug and Play Harness Plug and Play Harness (Part # NT-WHNT6) (Part # NT-GMIRC1) (Part # NT-LONG-RIB) NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100... - Page 4 Philips screw on each side of the display. Remove the display from the navigation unit but don’t pull on it as you still need to disconnect the flex ribbon cable in the next step. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 5 Installation Instructions Step 3: Remove the plastic cover of the factory flex ribbon cable. Step 4: Carefully lift up the brown release tab and release the factory flex ribbon cable. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 6 Step 6: Carefully lift up on the brown release tab, release and remove the factory flex ribbon cable. Install the supplied flex ribbon cable (Part # NT-GMIRC1) in place of the removed factory flex cable. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 7 Step 7: Route small flex ribbon cable (Part # NT-LONG-RIB) through the side of the navigation unit with the contacts facing DOWN. Step 8: Route small flex ribbon cable (Part # NT-LONG-RIB) inside the large white factory flex ribbon cable to avoid the mechanism gears. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 8 GMIRC1) with the contacts facing UP. A half twist on the small flex ribbon cable (Part # NT-LONG-RIB) is necessary for this step. Step 10: Carefully fold and insert the flex ribbon cable (Part # NT-GMIRC1) inside the navigation unit cavity. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 9 Camera Input/Video Input 2 on the interface harness. Step 19: Make sure both dip switches on the interface are facing UP in the OFF Position. Plug the interface harness into the interface. See Next Page for Quick Connection Diagram > NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
- Page 10 Quick Connection Diagram ON 1 Click Switches 1 and 2 UP Click Behind Vehicle’s Screen Do Not Connect Behind Radio (Part # NT-LONG-RIB) NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...
-
Page 11: Testing And Operation
To Turn On parking lines, place vehicle in reverse and hold 12 volts to the white wire until the lines Turn On. To Turn Off parking lines, place vehicle in reverse and hold 12 volts to the white wire until the lines Turn Off. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100... - Page 12 Step 2: Press the push button once to switch from Video 1 source to Video 2 source. Step 3: Press and Hold the push button for 2 seconds to return to the factory screen. NavTool.com | Call: +1-877-628-8665 | Text: +1-646-933-2100...