Advertisement
Quick Links
Installation Manual
Mini Clubman 2008-2010
Interface with HDMI
Part #: NAVTOOL6.0-LB0-HDMI
NOTICE: Navtool recommends having this installation performed by a certified technician.
Logos and trademarks used here in are the properties of their respective owners.
1
Mini Clubman 2008-2010
Advertisement
Related Manuals for NavTool Mini Clubman 2008-2010
Summary of Contents for NavTool Mini Clubman 2008-2010
- Page 1 Installation Manual Mini Clubman 2008-2010 Interface with HDMI Part #: NAVTOOL6.0-LB0-HDMI NOTICE: Navtool recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. Mini Clubman 2008-2010...
- Page 2 Print pages C1-C3 and give them to the customer NEED HELP? Open the camera app on your smart- phone and point your rear camera at the QR-Code to scan it. Finally, tap the pop up banner to open support website. Mini Clubman 2008-2010...
- Page 3 • Using protective blankets to cover front seats, interior of the vehicle and center console. • Always install a fuse 6-12 inches away from NavTool interface, 5 amp fuse should be used. • Always secure NavTool interface with Velcro or double side tape to prevent rattling of the interface.
- Page 4 (Part # NT-QUADLOCK-V1) (Part # NAVTOOL-BMWRLY) Vehicle Specific NavTool Interface Harness Plug and Play Harness NavTool Interconnect Cable (Part # NT-WHNT6) (Part # NT-BMWDRV) (Part # NT-EXT-BOX) USB Configuration Cable AUX Cable (Part # NT-USB-CNG) (Part # NT-AUX-35) Mini Clubman 2008-2010...
- Page 5 Do not use this USB port to power up HDMI streaming devices such as Roku, FireStick, Chromecast, or similar devices. HDMI Port- HDMI port is dedicated for connecting video sources such as iPhone mirroring, Android Mirroring, Apple TV, Roku, FireStick, Chromecast, PlayStation, Xbox, or similar devices. Mini Clubman 2008-2010...
- Page 6 In that case, this wire must be connected to the vehicle’s reverse +12V output. (Change setting “Manual Activation Wire as +12V Reverse Input” See page 41) +12V Output- 500 mA output can be used to drive a relay. This output provides +12V at all times when the vehicle is running. Mini Clubman 2008-2010...
- Page 7 Click See Page 8 See Page 2 Factory Wire Back of Car Radio (See Page 9) Remove Fiber Optic Cable from the factory plug and insert into the supplied plug and play harness (See Page 3) Mini Clubman 2008-2010...
- Page 8 Plug and Play Harness NT-QUADLOCK-V1 (Part # NT-BMWDRV) Car’s Factory Harness *2 Cable that was previously connected to the back of the car’s screen Click Back of the Car’s Screen Close up view of the Back of the Car’s Screen Mini Clubman 2008-2010...
- Page 9 Vehicle Factory Harness NavTool Supplied Harness NavTool Supplied Harness Image above is the fiber optic Take the NavTool supplied harness with Insert the fiber optic plug into assembly removed from the vehicle’s out the inserted fiber optic assembly. the same position on the factory harness.
- Page 10 Mac computers must use the latest version of the Google Chrome browser. Google computers must use the latest version of the Google Chrome browser. TO CONFIGURE THE INTERFACE, GO TO HTTPS://CONFIG.NAVTOOL.COM Connect the interface to the computer using supplied USB Configuration Cable (Part # NT-USB-CNG)
- Page 11 • Press the cover (1) together on the positions (2 and 3) with • Unscrew the screws (1). both palms. • Tightly grip the cover (1) in this position and rotate it counter clockwise, until the detent releases. • Remove the cover (1) towards the rear. Mini Clubman 2008-2010...
- Page 12 • Unlock locking mechanism (1) with screwdriver in arrow direction and at the same time pull central instrument towards passenger compartment. Panel Popper Tool Step 7: • Unlock plug connections (1) and disconnect. • Remove central instrument (2). Mini Clubman 2008-2010...
- Page 13 Step 1: Remove the Fiber Optic Cable from the factory plug and insert it into the supplied plug and play harness. (See page 9) Plug and Play Harness (Part # NT-QUADLOCK-V1) Factory Wire Remove Fiber Optic Cable from the factory plug and insert into the supplied plug and play harness Mini Clubman 2008-2010...
- Page 14 Step 1: Connect supplied universal wiring harness (Part # NT-WHNT6) into plug and play harness (Part # NT-QUADLOCK-V1). Plug and Play Harness (Part # NT-QUADLOCK-V1) NavTool Supplied Harness (Part # NT-WHNT6) (For complete image, see Quick Connection Guide on page 7) Mini Clubman 2008-2010...
- Page 15 Step 2: Connect the cable previously connected to the back of the vehicle’s screen into Vehicle Specific Plug and Play Harness (Part # NT-BMWDRV). Close up view of End view of NavTool harness NT-WHNT6 Back of Car’s Screen (For complete image see...
- Page 16 Step 1: Plug-in Vehicle Specific Plug and Play Harness (Part # NT-BMWDRV) into the back of the vehicle’s screen. Step 2: Plug-in Vehicle Specific Plug and Play Harness (Part # NT-BMWDRV) into NavTool Interface (Part # NAVTOOL-BMWRLY). End view of harness...
- Page 17 Installation Instructions STEP 9 Step 1: Plug-in NavTool Interconnect Cable (Part # NT-EXT-BOX) into NavTool Interface (Part # NAVTOOL-BMWRLY). Step 2: Plug-in NavTool Interconnect Cable (Part # NT-EXT-BOX) into NavTool Interface (Part # NAVTOOL6.0-LB0-NBT). NavTool Interface (Part # NAVTOOL6.0-LB0-NBT) Click...
- Page 18 After you have tested that everything is working, you reassemble the vehicle. If you are adding side or front cameras, install them and plug them into the appropriate camera RCAs. If you are installing any HDMI or streaming devices, connect them to the HDMI port of the NavTool. Note: If your vehicle is not equipped...
- Page 19 Testing and Settings STEP 1 • Start the car, observe NavTool LED lights should be one blinking blue and two steady lit green LED lights. HDMI LED Data LED Power LED • At this time, your car radio should boot up into its initial state, and the radio should be working.
- Page 20 OFF, once the red dot is set to OFF (image shown on the left), rotate the joystick to highlight SAVE button and press the enter button on the joystick remote to SAVE. Step: 3 Mini Clubman 2008-2010...
- Page 21 Set vehicle in reverse gear to test operation of the factory rear view camera. Press and hold menu button on the factory joystick remote to exit the interface back into the factory screen. (The remainder of this page is intentionally left blank) Mini Clubman 2008-2010...
- Page 22 • Test HDMI input if you are connecting any HDMI video source. • Press the menu button on the factory joystick remote to reveal bottom NavTool menu bar. • Rotate joystick to the right to select HDMI input, press enter on the joystick to enter HDMI mode.
- Page 23 If all steps above are checked off, you will save time, money and have an extremely happy customer. All above steps eliminate any unnecessary customer comebacks to your shop. If you require any further assistance please call our tech support line, email or go online WWW.NAVTOOL.COM 1-877-628-8665 techsupport@navtool.com Mini Clubman 2008-2010...
- Page 24 How to Connect Rear Screens to Car With AV Input Car Monitor NavTool Interface HDMI to AV Adaptor 1 in 2 Out HDMI Splitter HDMI Sources Mini Clubman 2008-2010...
- Page 25 How to Connect Rear Screens to Car With HDMI Input Car Monitor NavTool Interface Car HDMI Input 1 in 2 Out HDMI Splitter HDMI Sources Mini Clubman 2008-2010...
- Page 26 The color/navigation screen will display a factory image when you first start your vehicle. • Set the radio to AUX input to hear sound from the HDMI device you connected to NavTool interface. Audio will play via AUX input of the radio. See page C2 for details.
- Page 27 •Rotate the factory joystick remote to the right and select AUX. •Press enter on the joystick to set the audio to AUX. • Audio will not play through car speakers if AUX input is not connected or radio is not set to AUX input. Mini Clubman 2008-2010...
- Page 28 Press and hold for 3-5 seconds to turn the interface ON when on the car’s factory screen. Press and hold again for 3-5 seconds to activate NavTool interface. Press and hold again for 3-5 seconds to turn the NavTool interface OFF . Mini Clubman 2008-2010...