Advertisement
Quick Links
Installation Manual
BMW 6 Series 2004-2009
Interface with HDMI
Part #: NAVTOOL6.0-LB0-HDMI
NOTICE: Navtool recommends having this installation performed by a certified technician.
Logos and trademarks used here in are the properties of their respective owners.
1
BMW 6 Series 2004-2009
Advertisement
Related Manuals for NavTool 6.0-LB0-HDMI
Summary of Contents for NavTool 6.0-LB0-HDMI
- Page 1 Installation Manual BMW 6 Series 2004-2009 Interface with HDMI Part #: NAVTOOL6.0-LB0-HDMI NOTICE: Navtool recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. BMW 6 Series 2004-2009...
- Page 2 WELCOME Table of Contents IMPORTANT WARNING Installation Instructions This product includes instructions for Precautions installation, which must be carefully followed. The instructions are worded in such a manner to assume that What’s In The Box the installer is capable of completing these types of electronic installations.
- Page 3 • Using protective blankets to cover front seats, interior of the vehicle and center console. • Always install a fuse 6-12 inches away from NavTool interface, 5 amp fuse should be used. • Always secure NavTool interface with Velcro or double side tape to prevent rattling of the interface.
- Page 4 What’s In The Box? Vehicle Specific Plug and Play Harness NavTool Interface NavTool Interface (Part # NAVTOOL6.0-LB0-NBT) (Part # NT-QUADLOCK-V1) (Part # NAVTOOL-BMWRLY) Vehicle Specific NavTool Interface Harness Plug and Play Harness NavTool Interconnect Cable (Part # NT-WHNT6) (Part # NT-BMWDRV)
- Page 5 Android Auto Main Connector for Screen Interface Module Configuration Port HDMI Port NavTool Interface (Part # NAVTOOL6.0-LB0-NBT) Data LED HDMI LED Power LED Main Connector for Universal Interface Harness- This port is dedicated for a connection of a universal wiring harness.
- Page 6 Universal Harness Description Rear Camera Input/ Video Input 1 Front Camera Input/ Video Input 2 NavTool Interface Harness (Part # NT-WHNT6) Left Camera Input/ Video Input 3 Right Camera Input/ Video Input 4 Connector for Vehicle Specific Harness 12V Output Wire...
- Page 7 Quick Connection Guide NavTool Interface See Page 8 See Page 2 (Part # NAVTOOL6.0-LB0-NBT) Click NavTool Supplied Harness (Part # NT-WHNT6) AUX Input jack installed in your car from the factory Click See Page 8 See Page 2 Factory Wire...
- Page 8 Quick Connection Guide 2 NavTool Interface (Part # NAVTOOL6.0-LB0-NBT) Click NavTool Interface Harness (Part # NT-WHNT6) NavTool Interconnect Cable (Part # NT-EXT-BOX) Click NavTool Interface (Part # NAVTOOL-BMWRLY) Click Click Vehicle Specific Plug and Play Harness (Part # NT-QUADLOCK-V1) Vehicle Specific...
- Page 9 Vehicle Factory Harness NavTool Supplied Harness NavTool Supplied Harness Image above is the fiber optic Take the NavTool supplied harness with Insert the fiber optic plug into assembly removed from the vehicle’s out the inserted fiber optic assembly. the same position on the factory harness.
- Page 10 Mac computers must use the latest version of the Google Chrome browser. Google computers must use the latest version of the Google Chrome browser. TO CONFIGURE THE INTERFACE, GO TO HTTPS://CONFIG.NAVTOOL.COM Connect the interface to the computer using supplied USB Configuration Cable (Part # NT-USB-CNG)
- Page 11 Installation Instructions STEP 2 Continued Step 1: Step 2: • Pop out switch for hazard warning system/central locking • Remove screw (1). (1) with panel popper and pull back. • Use panel popper as pictured. • Disconnect associated plug connection and remove switch •...
- Page 12 Installation Instructions STEP 3 Step 1: Unplug Factory Harness from the back of the Radio. Factory Harness Back of Car Radio STEP 4 Step 1: Remove the Fiber Optic Cable from the factory plug and insert it into the supplied plug and play harness.
- Page 13 Step 1: Connect supplied universal wiring harness (Part # NT-WHNT6) into plug and play harness (Part # NT-QUADLOCK-V1). Plug and Play Harness (Part # NT-QUADLOCK-V1) NavTool Supplied Harness (Part # NT-WHNT6) (For complete image, see Quick Connection Guide on page 7) BMW 6 Series 2004-2009...
- Page 14 Step 2: Connect the cable previously connected to the back of the vehicle’s screen into Vehicle Specific Plug and Play Harness (Part # NT-BMWDRV). Close up view of End view of NavTool harness NT-WHNT6 Back of Car’s Screen (For complete image see...
- Page 15 Step 1: Plug-in Vehicle Specific Plug and Play Harness (Part # NT-BMWDRV) into the back of the vehicle’s screen. Step 2: Plug-in Vehicle Specific Plug and Play Harness (Part # NT-BMWDRV) into NavTool Interface (Part # NAVTOOL-BMWRLY). End view of harness...
- Page 16 Installation Instructions STEP 9 Step 1: Plug-in NavTool Interconnect Cable (Part # NT-EXT-BOX) into NavTool Interface (Part # NAVTOOL-BMWRLY). Step 2: Plug-in NavTool Interconnect Cable (Part # NT-EXT-BOX) into NavTool Interface (Part # NAVTOOL6.0-LB0-NBT). NavTool Interface (Part # NAVTOOL6.0-LB0-NBT) Click...
- Page 17 After you have tested that everything is working, you reassemble the vehicle. If you are adding side or front cameras, install them and plug them into the appropriate camera RCAs. If you are installing any HDMI or streaming devices, connect them to the HDMI port of the NavTool. Note: If your vehicle is not equipped...
- Page 18 Testing and Settings STEP 1 • Start the car, observe NavTool LED lights should be one blinking blue and two steady lit green LED lights. HDMI LED Data LED Power LED • At this time, your car radio should boot up into its initial state, and the radio should be working.
- Page 19 • • Press menu button on the remote control to reveal Rotate joystick remote to highlight the settings gear. NavTool menu bar. • The settings gear is the top icon. • Rotate joystick to the right to highlight menu option.
- Page 20 Testing and Settings STEP 4 Camera Settings Rotate joystick to select the Camera Settings option then Camera Settings press enter button on joystick to enter this option. • Image above shows you typical camera settings. • To change camera settings, rotate joystick to highlight the input Step: 1 on the left, once you highlighted desired camera input (rear, front, left, or right), then press enter on the joystick remote to change...
- Page 21 • Test HDMI input if you are connecting any HDMI video source. • Press the menu button on the factory joystick remote to reveal bottom NavTool menu bar. • Rotate joystick to the right to select HDMI input, press enter on the joystick to enter HDMI mode.
- Page 22 If all steps above are checked off, you will save time, money and have an extremely happy customer. All above steps eliminate any unnecessary customer comebacks to your shop. If you require any further assistance please call our tech support line, email or go online WWW.NAVTOOL.COM 1-877-628-8665 techsupport@navtool.com BMW 6 Series 2004-2009...
- Page 23 How to Connect Rear Screens to Car With AV Input Car Monitor NavTool Interface HDMI to AV Adaptor 1 in 2 Out HDMI Splitter HDMI Sources BMW 6 Series 2004-2009...
- Page 24 How to Connect Rear Screens to Car With HDMI Input Car Monitor NavTool Interface Car HDMI Input 1 in 2 Out HDMI Splitter HDMI Sources BMW 6 Series 2004-2009...
- Page 25 The color/navigation screen will display a factory image when you first start your vehicle. • Set the radio to AUX input to hear sound from the HDMI device you connected to NavTool interface. Audio will play via AUX input of the radio. See page C2 for details.
- Page 26 Setting Radio to Auxiliary Note: If your vehicle is not equipped with AUX input, there is a way to retrofit your vehicle with AUX, contact us for more deatils Set Radio to AUX Audio Input: •Pull the joystick back towards the rear seat to select the Entertainment menu. •Rotate the factory joystick remote to the right and select AUX.
- Page 27 Press and hold for 3-5 seconds to turn the interface ON when on the car’s factory screen. Press and hold again for 3-5 seconds to activate NavTool interface. Press and hold again for 3-5 seconds to turn the NavTool interface OFF . BMW 6 Series 2004-2009...