Disassembly Procedure - Mitsubishi Electric PAA-A18AA1 Service Manual

13. DISASSEMBLY PROCEDURE

The side drain pan and the top plate must be removed from the coil assembly for vertical
configuration installation. Remove the side drain pan (as well as its support and 2 triangular pieces)
and the top plate as shown in the following steps. Removal of the side drain pan and top plate
increases airflow and efficiency.
FOR UPFLOW AND DOWNFLOW INSTALLATIONS:
1. THE TOP PLATE MUST BE REMOVED (AS SHOWN).
2. THE SIDE DRAIN PAN MUST BE REMOVED (AS SHOWN).
Specifications are subject to change without notice.
PAA-A18, 24, 30, 36, 42AA1/BA1/CA1
ATTENTION!
REMOVE TOP PLATE
55
REMOVE SIDE DRAIN PAN
© 2022 Mitsubishi Electric US, Inc.