Deregistering All Expansion
Handsets
You may deregister all expansion handsets from the
base station.
Caution: Read and perform the following instructions
carefully. Missing a step or performing a step incorrectly
may render your telephone system inoperable.
Action
1 Delete or listen to all voice mail messages,
if necessary, to clear the IN USE/voice mail
indicator.
Note: Skip this step if it does not apply to
your MD Series cordless telephone model.
2 Press OFF on the base station and all
handsets.
3 Press and hold down PAGE on the base
station until the IN USE indicator begins to
flash slowly, then release PAGE.
4 Press and hold down PAGE again until the
IN USE indicator begins to flash quickly, then
release PAGE.
5 Quickly and fully press and release PAGE
again.
6 Register handset displays. Press OK (
to begin the registration process (see
page 23), or press EXIT (
).
a
)
a
57