Conference Calling; Using The Intercom; Intercom Setup - Motorola md491 User Manual

Conference Calling

If one handset is already on a call, the display on
other handsets registered to the same base station
shows Line in use.
Once a second handset is added to the call, the
display on all handsets shows On conference. A
maximum of 2 handsets can be on a conference call
at the same time.
Action
To connect a second handset to a call, press
ON or Handsfree on the second handset.
To join a conference call, press ON from the
base station.
To disconnect from the conference call, press
OFF on either or both handsets.

Using the Intercom

Intercom Setup

You can set up a handset or base station so it
automatically answers an intercom page after 1 or 3
rings. All handsets are set to No Auto Answer at the
factory. Perform the following procedure on each
handset to change this setting.
51