UG.GSM.book Page 25 Thursday, June 6, 2002 8:51 AM
Charging the Battery
New batteries are shipped partially charged. Before you can use
your phone, you need to install and charge the battery, as indicated
by the following instructions. Some batteries perform best after
several full charge/discharge cycles.
Do This
1 Plug the travel
charger into
your phone
with the
release tab
facing up.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates that the battery is fully
charged (
remove the travel charger.
Note: When you charge the battery, the battery level indicator in
the upper right corner of the display shows how much of the
charging process is complete.
Battery Use
Battery performance depends on many factors, including your
wireless carrier's network configuration; signal strength; the
temperature at which you operate your phone; the features and/or
settings you select and use; and your voice, data, and other
application usage patterns.
Release tab
), press the release tab and
Getting Started - 25