Motorola RAZR2 V9m User Manual page 15

Note: Make sure to move the charging port door out
of the way to fully attach the charger to your phone.
Your phone might take several seconds to start
charging the battery. When the battery is fully
charged, the charging light turns off, and the phone
displays N.
Tip: Relax, you can't overcharge your battery. It will
perform best after you fully charge and deplete it a
few times.
You can also charge your battery by
connecting a cable from your phone's
Micro USB port to a USB port on a
computer. Both your phone and the
computer must be turned on, and your computer must
have the correct software drivers installed. Cables and
software drivers are available in Motorola Original data
kits, sold separately.
conserve battery charge
Using certain features of your phone can quickly
deplete your battery's charge. The features can include
transferring and listening to music, using the
camera, replaying video clips, and using
Bluetooth® wireless connections.
To save battery life:
• Don't block the light sensor on the front of
your phone (see page 2). The light sensor
helps conserve battery by sensing when to
dim the backlight.
• Turn off Bluetooth power when you are not
using it (see page 51).
essentials 13