Table of Contents
Advertisement
8.
CAUTION When you wash at high temperatures,
the detergent solution becomes hot.
Do not touch the hot detergent solution.
▶
To allow the detergent solution to flow out into the con-
tainer, remove the sealing cap.
Firmly press on the sealing cap.
9.
Clip the drain hose into the holder.
10.
Cleaning the drain pump
Requirement: The drain pump is empty. → Page 27
Since water may remain in the drain pump, unscrew the
1.
pump cap carefully.
The filter insert in the pump housing may become
‒
stuck due to coarse particles of dirt. Loosen the dirt
and remove the filter insert.
Clean the interior, the thread on the pump cap and the
2.
pump housing.
The pump cap is comprised of two parts which can be
taken apart for cleaning.
Ensure that the impeller in the drain pump can rotate.
3.
Insert the pump cap.
4.
Ensure that the parts of the pump cap are correctly
‒
assembled.
Cleaning and maintenance en-us
29
Advertisement
Table of Contents
