Sim Card - Motorola iDEN i80s User Manual

Digital multi-service data-capable rel 2 phone
Hide thumbs Also See for iDEN i80s:
Table of Contents

Advertisement

To accept your phone programming:
1
You will receive a Net Alert with the message New Browser Message -
Receive Programming Info.
Press B under GOTO.
2
You are prompted to accept changes to your phone's lists. Press B
3
under OK.
A confirmation screen displays. Press B under OK.
4
5
You are prompted again to accept changes to your phone's lists. Press
B under OK.
A confirmation screen displays. Press B under OK.
6
Press r to return to the idle screen.
7

SIM Card

Your phone comes with a built-in level of security protection through the use of
the SIM (Subscriber Identity Module) card. The SIM card stores all your
Phonebook information. Since this information is stored on the SIM card, not in
your phone itself, you can remove the information by removing the SIM card.
The SIM card is located in the SIM Card Holder on the back of the phone,
underneath the battery. You can verify that the SIM card is in place by removing
the battery and viewing the SIM card through the SIM card cover.
See "Inserting/Removing the SIM Card" on page 22 for information on locating
the SIM card. If there is no SIM card in your phone, notify your sales
representative.
NOTE: Except for making emergency calls, your phone will not function without the

SIM card.

SIM Card Personal Identification Number (PIN)
To prevent unauthorized use of your phone, your SIM card is protected by a
PIN. Each time the phone is powered on, you must enter your PIN. You can
change or disable your PIN if desired.
NOTE: Disabling your PIN enables anyone to use your phone. If you disable your PIN,
you must still keep the SIM card in the phone to make calls.
SIM Card
17

Advertisement

Table of Contents
loading

Table of Contents