Vcci Statement For Japan; Department Of Communications-Canada; Declaration Of Conformity For Rf Exposure - Cisco Aironet 1520 Series Manual

The use of the 4.9-GHz band requires a license and may be used only by qualified Public Safety
Note
operators as defined in section 90.20 of the FCC rules ( LAP1510 model only).

VCCI Statement for Japan

This is a Class B product based on the standard of the Voluntary Control Council for Interference from
Warning
Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a
domestic environment, it may cause radio interference. Install and use the equipment according to
the instruction manual.
Department of Communications—Canada
IC Certification Number:
AIR-RM1520G-A-K9:
AIR-RM1520A-A-K9:
Canadian Compliance Statement
This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du
Canada.
This device complies with Class B Limits of Industry Canada. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Cisco's access points are certified to the requirements of RSS-210 issue 5, RSP 100, and RSS 102 for
spread spectrum devices.

Declaration of Conformity for RF Exposure

This access point product has been found to be compliant to the requirements set forth in CFR 47
Section 1.1307 addressing RF Exposure from radio frequency devices as defined in Evaluating
Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.T
he antennas should be positioned more than 6.56 feet (2 meters) from your body or nearby persons.
This access point is also compliant to EN 50835 for RF exposure.
2461B-102064
2461B-102063