Table of Contents
Advertisement
5. BASIC OPERATIONS
Turning on/off the power
Note:
• Be careful about using this unit for a long time without running
the engine. If you drain the car's battery too much, you may not
be able to start the engine and this can reduce the service life
of the battery.
1. Press the [
] button to turn on the power.
2. It automatically remembers its last source mode and
will automatically switch to display that mode.
3. Press the [
] button for more than 1 second to turn
off the power of the unit.
Switching Source Modes
1. Press the [HOME] button to access the Home
Screen.
2. Select any source mode to switch mode.
Home Screen
1
2
9
8
1) Radio button
2) USB audio / iPhone / iPod / Bluetooth audio /
Aux button / MTP
3) Video / Miracast mode button
4) Clock display.
5) Day / Night / Auto mode button
6) Settings button.
7) Mobile Link button
8) Applications button
9) Phone button
Status Bar Display
The clock is displayed on the top left corner of the
touch screen. To adjust the clock, refer to "Settings
Operations".
The RDS indicator is displayed on the top right corner
of the touch screen. To adjust RDS settings, refer to
"RDS Operations".
3
4
7
6
5
1
1) Clock Display.
2) Connected Bluetooth device name.
3) Mute indicator. Lights up when audio is muted.
4) TA indicator
5) Bluetooth Network Signal strength indicator. Lights up
when Bluetooth is connected to the unit.
6) Bluetooth battery level indicator. Lights up when
Bluetooth is connected to the unit.
7) Bluetooth indicator. Lights up when Bluetooth is
connected to the unit.
Switch to Clock display
1. Press the [
] button to switch to clock display, while
the audio is still heard in the background.
2. Press the [
], [HOME] or [VOICE] button for the
display to return to previous display.
Adjusting the Volume
Press the [VOLUME+] to increase the volume; Press
the [VOLUME-] to decrease the volume. The volume
will be displayed overlapping the touch screen for
4 seconds. Press any area of the touch screen to
immediately cancel the volume display.
* The volume level is from 0 (minimum) to 40
(maximum). The factory default setting for this volume
is "13".
Switching Day / Night mode
Press the Day / Night / Auto mode button to toggle
the brightness of the touch screen in the following
sequence:
Day
Night
Auto
Day...
During Auto mode, brightness of the screen will depend
on illumination dimming switch.
Mute Function
Press the [MUTE] button to activate the mute function.
Press the button again to release mute.
Notes:
• The mute function is applied to both volume gains, but it cannot
function while in a phone call.
• Mute will be released by phone call interrupts. Ongoing voice
guidance from navigation applications will not release mute.
2
3
5
7
4
6
9
Advertisement
Table of Contents
