Disassembly Procedures - Alesis AI-4 Service Manual

1. REMOVAL OF TOP COVER / FRONT PANEL (Fig1)
(A) TAKE OUT THE 3PC SCREWS FROM WHICH
THE REAR PANEL.
(B) TAKE OUT THE 3PC SCREWS FROM WHICH
THE TOP PANEL.
(C) TAKE OUT THE 3PC SCREWS FROM WHICH
THE BOTTOM CHASSIS.
2. REMOVAL OF MAIN P.C.B (Fig2)
(A) REMOVE THE 16 PCS NUT SCREW FROM REAR PANEL.
(B) REMOVE THE 3 PCS SCREW FROM WHICH MAIN P.C.B
(C) REMOVE THE 2 PCS SCREW FRON WHICH REAR PANEL.
(D) REMOVE CABLE CONNECTOR FROM M

DISASSEMBLY PROCEDURES

Fig.1
Fig.2