Marvell Storage Utility; Installing The Marvell Storage Utility; Hpe Smart Storage Administrator - HP Enterprise ProLiant MicroServer Gen10 User Manual

Table of Contents

Procedure

1. Reboot the server.

2. On the POST drive information screen, press Ctrl+M.

Marvell Storage Utility

The Marvell Storage Utility (MSU) is a configuration and management utility for the embedded Marvell 88SE9230 PCIe to

SATA 6Gb/s Controller. This Marvell storage controller supports hardware RAID 0, 1, and 10 levels. Use the MSU to create

and manage RAID virtual disks and arrays using the drives connected to the embedded storage controller.

To enable MSU access through GUI or CLI, install the MSU in the server.

For more information, see the Marvell Storage Controller User Guide for the HPE ProLiant MicroServer Gen10 in the

Hewlett Packard Enterprise Support Center website:

https://www.hpe.com/info/microservergen10-docs

Prerequisites

Access to some HPESC downloads might require product entitlement. You must have an HPE Passport set up with

relevant entitlements.

Procedure

1. Go to the HPE ProLiant MicroServer Gen10 download page:

https://www.hpe.com/downloads/microservergen10

2. Under Software Type select Utility.

3. Download the Marvell Storage Utility (MSU) for HPE MicroServer Gen10 Server

package compatible with the target server OS.

4. Unzip the package and open the Marvell_MSU folder.

5. Follow the installation procedure described in the instructions.txt file.

HPE SSA is the main tool for configuring arrays on HPE Smart Array SR controllers. It exists in three interface formats: the

HPE SSA GUI, the HPE SSA CLI, and HPE SSA Scripting. All formats provide support for configuration tasks. Some of the

advanced tasks are available in only one format.

The diagnostic features in HPE SSA are also available in the standalone software HPE Smart Storage Administrator

Diagnostics Utility CLI.

During the initial provisioning of the server or compute module, an array is required to be configured before the operating

system can be installed. You can configure the array using SSA.

HPE SSA is accessible both offline (either through HPE Intelligent Provisioning or as a standalone bootable ISO image)

and online:

•

Accessing HPE SSA in the offline environment

Software and configuration utilities

Table of Contents