Adjust Sensor Wash - Miele G4203SCU Operating Instructions Manual

Adjust Sensor wash

You can adjust the Sensor wash
programme so that it will remove
stubborn soiling in a lightly soiled load.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the / button in and, whilst
holding it in, switch the dishwasher
on using the  button.
Keep the / button pressed in for
at least four seconds until the /
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
Programme options
 Press the  button five times.
The  indicator light will flash rapidly
five times at intervals.
The flashing sequence in the display
indicates whether "Adjust sensor wash"
is activated or not.
–  : "Adjust sensor wash" is switched
on.
–  : "Adjust sensor wash" is switched
off.
 Press the / button to change the
setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.
61