Indicators - Mitsubishi X50U User Manual

Indicators

The projector has three LED Indicators which shows the working condition of the projector.
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your
dealer.
POWER indicator
LAMP indicator
TEMP indicator
Normal condition
POWER LAMP TEMP
Off Off
Steady
red
Off
Steady Blinking
green green
Off
Steady Steady
green green
Abnormal condition
POWER LAMP TEMP
Steady Steady Blinking
green green red
Off
Steady Blinking
red red
Off
Steady
Blinking
green
green/red
Off
Steady Blinking
red red
Off
Steady Steady
red red
Off Off
Blinking
green/red
Steady Steady
or or
Blinking
green/red
Blinking Blinking
EN – 26
CONDITION
Stand-by
Lamp stand-by (about for 1 minute)
The POWER is ON. (Normal condition)
CONDITION
Unusual temperature
• The ventilation slits or air filter is clogged with
dust or debris.
• The fan has stopped due to an impediment.
• The room temperature is too high.
• The filter is dirty.
Lamp duration warning. (Lightning duration total
about 1, 500 hours.When the POWER is ON.)
Lamp duration warning. (Lightning duration total
about 1, 500 hours.When the POWER is OFF.)
Lamp duration warning. (Lightning duration total
about 2,000 hours.)
The lamp or filter cover is not closed.
Abnormal.
POWER
COMPUTER
SOURCE
LAMP
VIDEO
VOLUME
TEMP
AUTO POSITION
MUTE
MENU
ENTER
Notes
The power button cannot be used to switch
ON and OFF
POSSIBLE SOLUTIONS
• Remove the object from the ventilation
slits.
• Pull out the power plug andremove the
object. If you cannot, consult your dealer.
• Relocate the projector to a cooler place.
• Clean the filter.
Replace the lamp.
Exchange with a new lamp if the same
problem recurs.
Close the cover correctly.
Contact your dealer.