Bottom Side; Remote Control - Mitsubishi WD3300U User Manual

Preparating your projector (continued)

Bottom side

Remote control

29
About the laser beam
This remote control is a Class 2 laser product. (Max. output: 1 mW, Wavelength: 620-640 nm)
Beam Divergence: 6 m distance about 10.0 mm x 10.0 mm (±6.0 mm)
Caution:
• Pressing the LASER button on the remote control emits a laser beam. Do not look into the laser beam directly. Do
not point the laser beam at anyone. Looking at the laser beam directly may damage eyesight.
• Use of controls or adjustments or procedures other than those specified herein may result in hazardous radiation exposure.
• This remote controller cannot be repaired.
1
1
2
4
5
6 KEYSTONE AUTO POSITION
COMPUTER HDMI VIDEO
7 1
DVI-D(HDCP) S-VIDEO
2
8 ZOOM/FOCUS LENS SHIFT LASER
9
10
11
12 ENTER
MENU R-CLICK
HOME PAGE UP VOLUME
13
END PAGE DOWN
14
ASPECT
15
CE AV MUTE FREEZE
16
1 Adjustment feet
1 Laser aperture
2 Transmission window
3 Wired remote control jack
4 Indicator
5 HDMI button
3
6 POWER button
7 COMPUTER 1, 2 buttons
8 ZOOM/FOCUS button
9 LENS SHIFT button
17
10 Mouse pointer
18
11 PAGE UP and PAGE DOWN buttons
19
20
12 MENU button
21
13 HOME button
14 END button
22
15 ASPECT button
16 CE (Color Enhancer) button
23
17 KEYSTONE button
18 AUTO POSITION button
24
19 VIDEO button
25
20 DVI-D(HDCP) button
26
21 S-VIDEO button
22 LASER button
27
23 , , ,  buttons
28
24 R-CLICK button
25 ENTER button
26 + , - (VOLUME) buttons
27 FREEZE button
28 AV MUTE button
29 Left click button
• Pressing the LASER button emits a laser beam.
Even when you keep holding down the LASER
button, it is emitted only one minute. To keep
emitting it longer, press the LASER button again.
• You can disable the LASER button to prevent
laser radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the
 button 3 times.
How to enable the LASER button
While holding the LASER button down, press the
 button 3 times.
• Whenever the batteries are replaced, the
LASER button is enabled.
EN-8