Cobra microTALK 3175-PDF Owner's Manual page 8

3175-PDF VERSION.qxd
Mode Functions
Operation
Voice Activated Transmit (VOX)
In VOX mode, your microTALK
automatically transmitting when you speak. You can set the VOX
sensitivity level to fit the volume of your voice and avoid
transmissions triggered by background noise.
To Turn VOX Mode On Or Off:
Mode Button
1. Press the Mode button until the VOX icon
flashes on the display. The current On or
Off setting is displayed.
2. Press the Channel Up or Channel Down
VOX Icon
button to turn VOX On or Off.
3. Choose one (1) of the following:
a. Press the Mode button to enter the
selected On or Off setting and proceed
Channel Button
to other functions.
b. Press the Lock button to enter the
selected On or Off setting and return
to Standby mode.
To Set The Sensitivity:
Mode Button
1. Press the Mode button until the VOX icon
flashes and the current sensitivity level is
displayed.
VOX Sensitivity Level
Channel Button
11/20/03 10:45 AM
® radio can be used "hands-free,"
The current sensitivity level is displayed
with letters "LE" and a Number 01
through 05, with Number 05 being the
most sensitive level and Number 01
being the least sensitive level.
Page 10
Introduction
Ten (10) Memory Locations
•
Your microTALK
your most frequently used channels and channel/privacy codes.
These Memory Locations can be selected individually or can
be scanned. (See page 17 for memory location scan.)
Mode Button
Memory Icon
Channel Button
Lock Button
7. Choose one (1) of the following:
a. Press the Lock button to enter the channel/privacy code in
Operation Customer Assistance
® radio has Ten (10) Memory Locations for storing
To Program A Memory Location:
1. Press the Mode button until the Memory icon
and the memory location flash on the display.
2. Press the Channel Up or Channel Down
button to select the memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3. Press the Lock button to enter a new memory
location or edit an already programmed
memory location. The channel numbers
will flash on the display.
4. Press the Channel Up or Channel Down
button to select a channel (1 through 22).
5. Press the Lock button. The privacy code
numbers will flash on the display.
6. Press the Channel Up or Channel Down
button to select a privacy code (00 to 38).
Warranty
•