System Memory - Asus TUF GAMING B760-PLUS WIFI D4 Manual

1.4

System memory

The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for
(Double Data Rate 4)
A DDR4 memory module is notched differently from a DDR, DDR2, or DDR3 module. DO
NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.
•
•
•
•
•
•
Recommended memory configurations
DIMM_A2
1st
1-12
memory modules.
DIMM_A1
DIMM_A2
DIMM_B1
DIMM_B2
You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel configuration. Any
excess memory from the higher-sized channel is then mapped for single-channel
operation.
You may install 4 GB, 8 GB, 16 GB, and 32 GB unbuffered and non-ECC DDR4
DIMMs into the DIMM sockets.
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
For system stability, use a more efficient memory cooling system to support a full
memory load.
Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists), and data rate
support depends on the CPU types.
DIMM_A2
1st
DIMM_B2 1st
Channel
1st
Channel A
Channel B
1st
DIMM_A1
DIMM_A2
DIMM_B1
DIMM_B2
Sockets
DIMM_A1 & DIMM_A2
DIMM_B1 & DIMM_B2
1st
1st
Chapter 1: Product Introduction
DDR4
1st
1st