Asus TUF GAMING B760-PLUS WIFI D4 Manual page 13

3. Expansion slots
This motherboard supports one PCIe 5.0 x16 graphics card, one PCIe 3.0 x16 (supports x4
mode) and two PCIe 3.0 x1 network cards, SCSI cards and other cards that comply with the
PCI Express specification.
4. Fan headers
The Fan headers allow you to connect fans to cool the system.
Max.
Header
Current
CPU_FAN 1A
CPU_OPT 1A
AIO_PUMP 1A
CHA_FAN1 1A
CHA_FAN2 1A
CHA_FAN3 1A
CHA_FAN4 1A
5. Power connectors
These Power connectors allow you to connect your motherboard to a power supply. The
power supply plugs are designed to fit in only one orientation. Find the proper orientation and
push down firmly until the power supply plugs are fully inserted.
Ensure to connect the 8-pin power plug, or connect both the 8-pin and 4-pin power plugs.
• For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
• We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
6. M.2 slots (Key M)
The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.
Intel
•
M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
Intel
•
M.2_2 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 4.0 x4 mode)
M.2_3 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
The M.2 SSD module is purchased separately.
7. SATA 6Gb/s ports
The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and
hard disk drives via SATA cables.
ASUS TUF GAMING B760-PLUS WIFI D4
Max.
Default Speed
Power
12W Q-Fan Controlled
12W Q-Fan Controlled
12W
12W Q-Fan Controlled
12W Q-Fan Controlled
12W Q-Fan Controlled
12W Q-Fan Controlled
13 & 12 Gen Processors
® th th
B760 Chipset
®
Shared
Control
A
A
Full-Speed -
-
-
-
-
FAN PWM
FAN IN
FAN PWR
GND
1-3