Pairing A Quantum™ Radar Scanner - Raymarine LIGHTHOUSE SPORT 3.18 Operation Instructions Manual

Pairing a Quantum™ radar scanner
You can connect a Quantum™ radar scanner to your display using the Wi-Fi
connection.
Pre-requisites:
• Ensure you have installed and connected your Quantum™ radar scanner to
a power supply following the instructions supplied with the radar scanner.
• Ensure you know your Quantum™ radar scanner's SSID and passcode.
1. Select [Pair with Quantum] from the [This display] tab: [Homescreen >
Settings > This display > Quantum Radar: > Pair with Quantum].
2. Enter the SSID and passcode for your Quantum™ radar.
3. Select [Connect].
4. Follow any onscreen instructions to continue pairing with your Quantum™
radar.
The pairing process may take several minutes to complete.
For more information on the Quantum™ radar pairing process
(including troubleshooting information), refer to your Quantum™ radar
documentation.
38