Ford Ranger 2008 Owner's Manual page 221

RANGER_F8M1-10-08I_Edition1 Page221
Friday, September 26 2008 3:7 PM
3. Pull the fuse straight out with the fuse
puller provided on the fuse panel.
Fuse puller
4. Inspect the fuse and replace it if it's
blown.
Normal
5. Insert a new fuse of the same amperage
rating, and make sure it fits tightly. If it
does not fit tightly, have an expert
install it. We recommend an
Authorised Ford Repairer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the CIGAR circuit.
CAUTION
Always replace a fuse with one of the
same rating. Otherwise you may
damage the electric system.
Form No.F8M1-10-08I
Replacing the fuses under the bonnet
If the headlights or other electrical
components do not work and the fuses in
the cabin are normal, inspect the fuse
block under the bonnet. If a fuse is blown,
it must be replaced. Follow these steps:
1. Turn off the ignition switch and all
2. Remove the fuse block cover.
NOTE
Blown
Remove the engine and battery covers
before removing the fuse block cover
near the battery.
Black plate (221,1)
Maintenance and Care
Owner Maintenance
other switches.
Fuse block cover
Tab
8-35