Ford Ranger 2008 Owner's Manual page 216

RANGER_F8M1-10-08I_Edition1 Page216
Friday, September 26 2008 3:7 PM
Maintenance and Care
Owner Maintenance
Front direction indicator lights,
Parking lights
1. If you are changing a bulb in the right
headlight unit, start the engine, turn the
steering wheel all the way to the right,
and turn off engine. If you are
changing a bulb in the left headlight
unit, turn the steering wheel to the left.
2. Make sure the headlight switch is off.
3. Turn the centre section of the plastic
retainers anticlockwise and remove
them, then partially peel back the
mudguard.
Removal
Installation
4. Turn the socket and bulb assembly
anticlockwise and remove it.
5. Disconnect the bulb from the socket.
Front direction indicator lights
8-30
Form No.F8M1-10-08I
Black plate (216,1)
Parking lights
6. Install the new bulb in the reverse order
of removal.
Side direction indicator lights
(Bulb type)
1. Make sure the ignition is switched off,
and the direction indicator switch is
off.
2. Slide the unit as shown in the figure to
remove it.