Ford Ranger 2008 Owner's Manual page 144

RANGER_F8M1-10-08I_Edition1 Page144
Friday, September 26 2008 3:6 PM
Interior Comfort
Audio System
qClock
Clock button
Setting the time
The clock can be set at any time when the
ignition switch is in the ACC or ON
position.
1. To adjust the time, press the clock
button ( ) for about 2 seconds
until a beep is heard.
The clock's current time will flash.
2. To advance the hours, press the hour
set button ( ). To advance the
minutes, press the minute set button
( ) while the time is flashing.
3. Press the clock button (
to start the clock.
6-22
Form No.F8M1-10-08I
Display
Hour set button Minute set button
NOTE
To switch between '12Hr' and '24Hr'
time displays, press the display switch
buttons (
flashing.
Exact hour adjustment
1. To set the exact hour, press the clock
button (
until a beep is heard.
The clock's current time will flash.
2. Press the clock button (
) again
and the time will be adjusted as
follows:
(Example)
12:01 12:29→12:00
12:30 12:59→1:00
Black plate (144,1)
, ) while the time is
) for about 2 seconds
) again