Setting The Presentation Timer - Mitsubishi EX200U User Manual

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help
you achieve better time management when giving presentations. Follow these
steps to utilize this function:
1. Press TIMER SET UP on the remote control or go to the SYSTEM
SETUP: Basic > Presentation Timer menu and press MODE/ENTER to
display the Presentation Timer page.
2. Press to highlight Timer period and decide the timer period by
pressing /
minute increments and 5 to 240 minutes in 5-minute increments.
If the timer is already on, the timer will restart whenever the Timer period is reset.
3. Press to highlight Timer display and choose if you want the timer to show up on the screen by press
.
Selection
Always
1 min/2 min/3 min
Never
4. Press to highlight Timer position and set the timer position by pressing
/
.
5. Press to highlight Timer counting direction and select your desired
counting direction by pressing
Selection
Count Up
Count Down
6. Press to highlight Sound reminder and decide if you want to activate sound reminder by pressing
you select On, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep
sound will be produced when the timer is up.
7. To activate the presentation timer, press
8. A confirmation message is displayed. Highlight Yes and press MODE/ENTER to confirm. You will see the
message "Timer is On" appearing on the screen. The timer starts counting once the timer is turned on.
To cancel the timer, perform the following steps.
1. Go back to the Presentation Timer page.
2. Press and press
3. Highlight Yes and press MODE/ENTER to confirm. You will see the message "Timer is Off" appearing on the
screen.
How to use the TIMER On key?
TIMER ON is a multi-functional key.
• If the presentation timer is off, pressing this key displays a confirmation
message. You can decide whether to activate the timer or not by following
the on-screen instruction.
• If the timer is already on, pressing this key displays a confirmation
message. You can decide whether to restart, continue or turn off the timer
by following the on-screen instruction.
. The length of time can be set from 1 to 5 minutes in 1-
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 1/2/3 minute(s).
Hides the timer throughout the presentation time.
/
.
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
/ to highlight Off and press MODE/ENTER. A confirmation message is displayed.
and press / to select On and press MODE/ENTER.
/
ing
5 min
5 min
5 min
5 min
/ . If
EN-29