Security Settings; Closed Caption; Lan Control Settings - Mitsubishi EW230U-ST User Manual

FUNCTION

Security Settings

Closed Caption

LAN Control Settings

Reset All Settings
Current System Status
DESCRIPTION
Change password
You will be asked to enter the current password before changing to a
new one.
Power on lock
See "Utilizing the password function" on page 22
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed
captioned (usually marked as "CC" in TV listings).
When the projector displays OSD or any dialog, captions are not
displayed at the same time.
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).
If you are using a LAN cable for connection, see
controlling by computer" on page 36
If you are using a RS-232C cable for connection, go to the SYSTEM
SETUP: Advanced > LAN Control Settings > Control By menu and
select RS-232C. And press Apply to save the settings.
LAN and RS-232C function cannot work spontaneously.
Returns all settings to the factory preset values.
The following settings will still remain: Phase, H. Size, User 1,
User 2, Language, Projector Position, Security Settings.
Source
Shows the current signal source.
Setting
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
for details.
"Supervising and
for details.
EN-45