Mitsubishi EW230U-ST User Manual page 41

Projector Position
Auto Power Off
4.
SYSTEM SETUP: Blank Timer
Basic
Panel Key Lock
Timer Controller
Splash Screen
Quick Cooling
Audio Settings
Menu Settings
Standby Monitor Out
Lamp Settings
5.
SYSTEM SETUP:
Security Settings
Advanced
Closed Caption
LAN Control Settings
Reset All Settings
6. INFORMATION
Current System Status
Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment
connected to the projector or no signal detected, limited menu items are accessible.
Front Table/Rear Table/Rear Ceiling/
Front Ceiling
Disable/5 min/10 min/15 min/20 min/25
min/30 min
Disable/5 min/10 min/15 min/20 min/25
min/30 min
On/Off
Disable/30 min/1 hr/2 hr/3 hr/4 hr/8 hr/12
hr
Black/Blue/MITSUBISHI
On/Off
Mute On/Off
Volume
Standby Audio Out On/Off
Menu display time 5 sec/10 sec/15 sec/20 sec/25 sec/30 sec
Center/Top-Left/Top-Right/Bottom-Right/
Menu position
Bottom-Left
Off/On
Lamp mode Standard/Low
Reset lamp timer
Equivalent lamp hour
Change password
Power on lock On/Off
Closed Caption
On/Off
Enable
Caption Version CC1/CC2/CC3/CC4
Control By RS-232C/LAN
DHCP On/Off
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Source
Setting
Resolution
Color System
Equivalent Lamp Hour
EN-41