Gps Data Displayed; Gps Connection Indicator; Gps Data Quality Indicator - Mio DigiWalker C310 Software Manual

• Time Sync .

4.4.1 GPS data displayed

The virtual sky on the left represents the currently visible part of the sky above you,
with your position as the center. The satellites are shown at their current positions.
The GPS receives data from both the green and gray satellites. Signals from the
gray satellites are only received, while green ones are used by the GPS to calculate
your current location. On the right you can see the satellite signal strength bars. Dark
bars are for the gray and orange bars are for the green satellites. To identify
satellites use their numbers also shown in the virtual sky. The more satellites your
GPS tracks (the green ones), the better your calculated position will be.
Additional pieces of information on this screen are: current position in
latitude/longitude format, elevation, speed, date, time and calculated accuracy.
Note: Accuracy can be affected by several factors the GPS cannot take into account.
Use this accuracy information only as estimation.
There are two icons on the left to show the status of the GPS connection and the
quality of reception.

4.4.2 GPS connection indicator

In the middle to the left there is a lamp similar to the ones used for switches. This
one has more colors and represents more values:
•
a fast blinking green lamp means that there is communication with the GPS
and data is being received,
•
these appear, this means a faulty operation of your device.

4.4.3 GPS data quality indicator

In the top left corner there is a satellite dish to show the quality of the GPS position.
Different colors represent different signal quality:
other colors may not appear with a built-in GPS. Should any of
35